Thermaltake Pacific W1 CPU Water Block
Thermaltake’s new Pacific W1 CPU Water Block delivers extreme cooling
performance and compatibility for custom PC builders. Featuring 0.15mm internal fin construction, the Pacific
W1 is manufactured with a full copper base and anti-corrosive nickel plating. A universal mounting mechanism
offer error-free as well as no-tools installation, providing the ultimate in cooling performance.
Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied only to products that pass the design and hardcore enthusiasts standards that a true LCS chassis should hold to. The Tt LCS certification was created so that we at Thermaltake can indicate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations, ensuring you get the best performance from the best features and fitment.
Anti-corrosion Design
Made in Taiwan, the Pacific W1 Water Block’s specially machined copper base
with nickel coating prevents corrosion and fully complies with Thermaltake’s highest quality standards. The
mating surface to the CPU sports an absolute mirror polish. In combination, these features provide exceptional
heat transfer and anti-corrosion protection for the most demanding use conditions.
Optimized Micro-channel Structure
The Pacific W1 Water Block is designed with a compact form factor featuring
0.15mm micro-channel fin construction for optimal clearance and extreme heat dissipation. A silicone rod
guides coolant through the bottom of each micro-channel.
No-Fuss Expansion
Designed to fit all modern CPU sockets with universal mounting mechanisms,
the Pacific W1 allows enthusiasts to build superior water cooling systems from an aesthetic standpoint as well
as incorporate modular chassis upgrades for the future.
Intel Socket
AMD Socket
Cautions
Thermaltake recommends the following steps before using the Pacific series radiators and water blocks:
- To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
- Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
- It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, for optimal performance and corrosion protection.
- Before storing your water cooling components, clean, rinse, and dry them to ensure a longer lifespan.
After completing your water loop setup, Thermaltake recommends:
- Use pre-mix coolant, such as Thermaltake Coolant 1000, for corrosion protection and performance.
- Fill the reservoir with coolant and power the pump on and off multiple times to ensure the loop is properly filled.
- DO NOT let the pump run dry. Turn off the power immediately if there is no liquid entering the pump.
- Fill the reservoir to the top to prevent air from entering the pump.
- If necessary, tilt the system to help bleed air from the loop.
- Place paper towels under fittings to test for leaks.
- Run the loop with the fill port open for about 24 hours to bleed air out completely.
- Flush the system correctly before starting to prevent any particles from sticking to your tubes and components.
- Coolant color might fade over time.
| P/N | CL-W022-CU00BL-A |
|---|---|
| Dimensions | 60 H * 54 W* 16 L mm |
| Weight | 345 g |
| Compatibility | Intel LGA 2066/2011/1366/1200/1156/1155/1151/1150/775 AMD AM4/FM2/FM1/AM3+/ AM3/AM2+/AM2 |
| Threads | G ¼” |
| Heatsink Material | Copper |
